This is a complete throttle kit assembly for a Right Hand Drive Latebay T2B 1972 to 1976 (If you own a 1972 or a 1976 these are Crossover years in the throttle kit world)
The original kits are based on a steel rod inside a loose fitting steel tube.
This kit is very similar but has internal roller bearings so less play/slop .
It is a very smooth system .
This kit has several other modifications done to it .
At the cable end there are now 3 different locations to give more pull or less pull on the cable , so caters for stock engines and modified setups .
There is also the added bonus of a return spring that will reset the pedal , and take the pressure off the carb return springs .
At the pedal end there is now a rose jointed linkage that goes to the pedal , alot more positive to the old `S` shaped push rod , this is also adjustable . The whole kit has been Black plated so long lasting coating with a high salt resistance .
(NOTE YOUR BUYING THE LINKAGE NOT THE PEDAL AND FLOOR HINGE)
Kit comes ready to bolt in , with longer screws to use with your original tube clamps .
Will fit the following vehicles
Upgrade Accelerator pedal linkage kit Baywindow RHD was successfully added to your basket.